Manufacturing Test Archives | Page 4 of 6

ASSET ScanWorks’ two FPGA-based instruments for testing on-board memory named Best in Test finalists

Thursday, December 13, 2012

FPGA-controlled test (FCT) tool for ScanWorks inserts, configures and executes IJTAG board test instruments from functional FPGAs Two new instruments for ASSET® InterTech’s ScanWorks® platform for embedded instruments have been named finalists by Test & Measurement World in its 2013 Best in Test awards program. ASSET’s instrumentation intellectual property (IP) supports…

Integrating ASSET's ScanWorks with Linear Technology's LTpowerPlay

Tuesday, October 23, 2012

Linear Technology and ASSET collaborate to bring boundary-scan tools to power management devices Richardson, TX, and Milpitas, CA – ASSET® InterTech (www.asset-intertech.com), the leading supplier of tools for embedded instrumentation, and Linear Technology Corp. (www.linear.com) have collaborated to combine the programming and configuration capabilities of Linear Technology’s LTpowerPlay™ software with…

ASSET integrates ScanWorks with Teradyne's PXI Express instruments

Monday, September 10, 2012

Richardson, TX, and North Reading, MA – ASSET® InterTech (www.asset-intertech.com), the leading supplier of tools for embedded instrumentation, and Teradyne (www.teradyne.com), the leading supplier of automatic test equipment (ATE), have extended the integration of the JTAG and boundary-scan test capabilities of ASSET’s ScanWorks® platform for embedded instruments into Teradyne’s…

ASSET's two new embedded instruments test memory from a board-tester-in-a-chip

Tuesday, August 7, 2012

Instruments for ScanWorks FPGA-controlled test (FCT) perform DDR2, DDR3 and generic memory tests at maximum speeds Richardson, TX (August 7, 2012) – ASSET® InterTech has added two new memory test instruments to its ScanWorks® embedded instrumentation library for its FPGA-controlled test (FCT) circuit board test tool, giving electronics manufacturers…

ASSET's two new ScanWorks controller kits tap into high-speed PCI Express bus

Thursday, May 17, 2012

New PCIe-1000 and PCIe-410 are platform controllers supporting ScanWorks® validation, test and debug tools. Richardson, TX – Two new controller kits for the ScanWorks® platform for embedded instruments from ASSET® InterTech (www.asset-intertech.com) can accelerate test throughput by plugging into the high-speed PCI Express® (PCIe) bus in the personal computer…

ASSET ScanWorks FCT named to EDN magazine's Hot 100 Products list

Tuesday, November 29, 2011

Editors at EDN chose ScanWorks from among thousands of new products released during 2011 Richardson, TX – ASSET® InterTech’s ScanWorks® FPGA-controlled test (FCT) has been named to the Hot 100 Products list by the editors of EDN magazine, an authoritative publication and web site serving the electronics industry. ASSET…

Four products within the ASSET ScanWorks platform for embedded instruments are named Best in Test finalists

Tuesday, November 15, 2011

Richardson, TX (Nov. 15, 2011) – Four new products for ASSET® InterTech's ScanWorks® platform for embedded instruments have been named finalists by Test & Measurement World magazine for its 2012 Best in Test awards. ASSET (www.asset-intertech.com) is the leading supplier of tools for embedded instrumentation. "It always a tremendous…

ASSET's new Ethernet controller for ScanWorks tests four circuit boards at once

Tuesday, November 1, 2011

Richardson, TX – The new Remote Instrumentation Controller 4000 (RIC-4000) for ASSET®’s ScanWorks® platform for embedded instruments can connect over an Ethernet network and apply boundary scan (JTAG) tests on as many as four circuit boards at once. The units under test (UUT) and ScanWorks could be in the…

ASSET's new FPGA-controlled test (FCT) inserts and operates a board-tester-in-a-chip

Tuesday, September 20, 2011

ScanWorks automatically connects multiple instruments and inserts a tester in an FPGA to validate, test or debug the host circuit board. Richardson, TX – With new tools for the ASSET® ScanWorks® platform for embedded instruments engineers can simply select instruments they need, set their parameters and insert them into…

ASSET integrates ScanWorks with Teradyne Di-Series instruments for robust boundary-scan test

Tuesday, September 13, 2011

Teradyne and ASSET collaborate to bring boundary-scan board test and device programming to large scale military/aerospace testers. Richardson, TX, and North Reading, MA – ASSET® InterTech (www.asset-intertech.com), the leading supplier of tools for embedded instrumentation, and Teradyne (www.teradyne.com), the leading supplier of automatic test equipment (ATE), have collaborated to…

Manufacturing Test